Spraybond X90 Hybrid
« Back to overview
Description
Zettex Spraybond X90 Hybrid is an excellent hybrid polymer based ahesive without isocyanate and
plasticisers. Zettex X90 Hybrid is developed as a one sided spray to bond of all kinds of roofing and flooring materials.
Zettex Spraybond X90 Hybrid is an excellent hybrid polymer based ahesive without isocyanate and
plasticisers. Zettex X90 Hybrid is developed as a one sided spray to bond of all kinds of roofing and flooring materials.
Material
Hybrid Polymers
Hybrid Polymers
Product properties
• One component
• Solvent free
• Extremely powerful
• Fast drying
• Plasticiser resistant
• For universal use
• Ready to use
• One side applying
• Non flammable
• Economical in use
• Permanent flexible bond
• Low foaming
• High temperature resistance
• No plasticizer migration
• Unilaterally applied
• One component
• Solvent free
• Extremely powerful
• Fast drying
• Plasticiser resistant
• For universal use
• Ready to use
• One side applying
• Non flammable
• Economical in use
• Permanent flexible bond
• Low foaming
• High temperature resistance
• No plasticizer migration
• Unilaterally applied
Packaging
• Pressurised cylinder 23kg
Colour
• Brown, others on request
• Pressurised cylinder 23kg
Colour
• Brown, others on request
Areas of application
• For the fast and effective adhesion of all types of roof and floor surfaces, such as; PVC, EPDM, TPO,
Bitume, Linoleum, Marmoleum and PU based surfaces.
Applications
•Remove any moisture and grease from the surface being glued. Gently spray the contact adhesive on
to surface being glued. The ideal distance between the surface and the spray gun is 30 cm. Try to apply
the glue in a single layer. Bring the surfaces together after 2-4 minutes and press or roller firmly. Check
thoroughly to see whether there is sufficient contact between the glue layers if the surface is porous.
Apply an extra layer, if necessary.
• For the fast and effective adhesion of all types of roof and floor surfaces, such as; PVC, EPDM, TPO,
Bitume, Linoleum, Marmoleum and PU based surfaces.
Applications
•Remove any moisture and grease from the surface being glued. Gently spray the contact adhesive on
to surface being glued. The ideal distance between the surface and the spray gun is 30 cm. Try to apply
the glue in a single layer. Bring the surfaces together after 2-4 minutes and press or roller firmly. Check
thoroughly to see whether there is sufficient contact between the glue layers if the surface is porous.
Apply an extra layer, if necessary.
| Features | Specification |
|---|---|
| Processing temperature | +5 to +40 degrees |
| Temperature resistance | -40 to +150°C |
| Usage | 90 gram/m² |
| Open time | Max 15 minutes |
| Maximum Coverage | 175m² |
| Solids Content | 50% |
| Colour | Brown |
| VOC | 407g/L |
| Spray Pattern | Web |